Tuesday, March 26, 2024
HomeNewsWhat Is The Best Way To Sharpen Lawn Mower Blades

What Is The Best Way To Sharpen Lawn Mower Blades

- Advertisment -

Remove Blade From Mower

How To Sharpen Lawn Mower Blades

Disconnect the spark plug on a gas mower or unplug an electric mower . Next, gently lay the mower on its side and use a wrench to remove the nut that attaches the blade to the motor. Then, remove the blade from the mower. To make sure you replace it the right way in the machine, mark the bottom of the blade with spray paint so you know that it should face the ground when you’re done.

How To Sharpen Lawn Mower Blades For A Better Looking Lawn

Its that time of year across most of the United States. With colder weather giving way for spring, lawn mowing season is back in full swing. Keeping your lawn looking nice comes down to a few key elements. Of course, taking the time to care for your lawn isnt always easy. That means when you do mow, you want to make sure youre getting the best cut possible. Therefore, you need to be keeping an eye on your lawn mower blades.

Worx cordless lawn mowers are some of the best value mowers on the market, but even top of the line equipment still requires regular maintenance to run the best it can. Lawn mower blades dull over time, and depending on the size of your lawn they might need regular care. Plenty of hardware stores will offer to sharpen your lawn mower blades for you, but theres no need to take them to someone else. Here are the best tips for sharpening lawn mower blades at home so anyone can get the job done!

Can I Sharpen My Lawnmower Blades Without Taking Them Off

Lawnmower blades should not be sharpened without taking them off. Blades should always be removed from the mower before sharpening, say the experts from Mowers Online. It is much more difficult to access the blade whilst on the machine and the chances of the blade slipping and causing injury are far higher.

You May Like: How Much Should I Water My Lawn In The Summer

How Do You Sharpen A Lawn Mower Blade With A Dremel

How to sharpen lawnmower blades with a Dremel, step by step:

  • Get the needed tools.
  • Disconnect the spark plug and inspect the existing set of blades.
  • Remove the center nut of the blade carefully and clamp it.
  • Sharpen the Blade with a Dremel.
  • Smoothen the edges and finish the blade.
  • Balance the blade and fix it back.
  • How To Sharpen A Lawn Mower Blade With An Angle Grinder

    Lawn Mower Blade Sharpening

    As we mentioned earlier, you can sharpen a lawnmower blade using any number of tools. One of the easiest involves using an angle grinder. Of the people Im aware of who already know how to sharpen a lawn mower blade, most use an angle grinder. The reason this works is that lawn mower blades dont need to be razor-sharp. They do, however, need a clean cutting edgepreferably at the proper angle. This clean edge lets the blade slice, instead of chop, through the grass at high speed. Its the difference between cutting carrots with a knife and a piece of 1/8-inch steel swung wildly through the air

    You May Like: Who Is The Best Lawn Care Service

    S To Sharpen A Lawn Mower Blade With A Drill Accessory:

    • Place the lawn mower blade in a vice
    • Insert the bit into the drill
    • Set the drill to High Speed
    • Run the accessory along the sharpened portions of the blade to refresh the edge

    One advantage of these types of sharpeners is that you can leave the blade on the mower. Depending on the type of blade and mower, you may get better results by removing the blade first. Still, it does provide a truly quick way to maintain your blade sharpness.

    What Does A Dull Blade Do To Grass

    Dull blades tend to tear at grass, rather than cutting them evenly. This results in browning of the lawn and in some cases, the mower blades might even rip out the grass by the roots. Avoid this by regularly sharpening your blades once every 20 to 25 hours of use and by replacing them with fresh, new blades every 100 to200hours of work use.

    Also Check: What Is The Best Riding Lawn Mower For The Price

    Can You Use A Flap Disc To Sharpen Mower Blades

    How I Sharpen Mower Blades 2019 Edition

    What kind of grinder do you use to sharpen a lawn mower blade?

    How To Quickly Sharpen A Lawn Mower Blade

    Can you sharpen a lawn mower blade with a grinder?

    There are several good ways to sharpen lawn mower blades, but one of the quickest and easiest methods is with an angle grinder, an inexpensive, versatile hand-held power tool.

    Will sandpaper sharpen a lawn mower blade?

    Sharpen Lawn Mower Blades with Sandpaper

    Grind the blade on sandpaper as you would with any fine tool, and then use it as normal. Sanding your blades will not only sharpen them but also remove built-up gunk thats accumulated over time.

    Related Question Answers:

    Method : Using A Bench Grinder

    How To Sharpen Lawn Mower Blades Best Way – GardenFork

    The fastest way to sharpen a lawnmower blade is by using a bench grinder. Simply grind the edge of your blade against the spinning wheel of the grinder. However, you should always wear protective equipment such as safety goggles, earplugs, and work gloves to avoid the risk of injury. While a bench grinder is usually loud and produces sparks, youll be able to sharpen the blade in a matter of minutes. A bench grinder is also a great option for repairing heavily-damaged blades that are hard to file smoothly by hand.

    Read Also: How Do I Seed My Lawn

    Proper Angle To Sharpen Lawn Mower Blades To

    If there is one subject that people love to discuss when it comes to mowers, its the best angle to sharpen a lawn mower blade. Rather than joining the debate, Ive pulled out the good stuff from the manufacturers, saving you from the minefield of information. This article will explain the proper angle to sharpen your lawn mower blade to, as well as explain why the angle of your blade edge really matters.

    Sharpening Lawn Mower Blades Without Removing Them

    Now that Ive outlined the process, I want to dig into the details of how to sharpen push lawn mower blades without removing them. While this may seem like a complicated process, its actually pretty simple. Anybody can sharpen their own lawn mower blade with the right equipment, so follow along and lets get it done.

    You May Like: What Is The Best Self Propelled Push Lawn Mower

    Remove The Blade From The Lawn Mower

    Use a 1/2-inch impact wrench if you have one. While this may have been an obscure tool for a consumer to have just a few years ago, manufacturers are bringing cordless impact wrenches more and more into the mainstream. So grab a grinder if you have one. If you dont, use the longest ratchet you have with the appropriate socket. If its still not budging, use a piece of 2×4 or similar material and tap the ratchet handle with a hammer via the wood . Be careful as the ratchet can easily slip off the center bolt.

    What Is The Best Grit For Sharpening Lawn Mower Blades

    How to Sharpen A Lawn Mower Blade Using a Grinder (Example: Craftsman ...

    Lawnmower blades are no different. For lawnmower blades, we recommend grinding wheels or files with a 60-80 grit rating. This is generally known as the medium coarseness range and it provides a balance between removing materials and precision sharpening. Less or more grit can remove too little or too much material.

    Recommended Reading: How Do You Get Rid Of Chipmunks In Your Lawn

    Does Wet Grass Dull Mower Blades

    Cutting your lawn when its wet is definitely harder on your blades. You can minimize the damage by thoroughly cleaning the blades both before you mow and afterwards. If you live in an area where it rains often and wet grass is hard to avoid, change your sharpening frequency to every 15 to 20 hours of work use for best performance.

    Set Your Table Angle To Match The Existing Blade Angle

    A bench grinder reverses the process of sharpening. Rather than move the grinder across the blade, you move the blade back and forth across the grinder wheel. Most bench grinders feature a table that tilts. Using this you can really get consistent results using this method. Set the angle of the table before you turn on the grinder and begin sharpening.

    Don’t Miss: Who Makes Snapper Lawn Mowers

    How Can You Sharpen Lawn Mower Blades

    There are a few ways you can sharpen your lawnmower blades. Some popular methods of sharpening lawn mower blades include using a sharpening stone or diamond sharpener, a grinder, or a handheld McCulloch or Husqvarna electric sharpener.One way is to buy a blade grinder, a small hand-powered machine with a rotating abrasive wheel.Another way is to sharpen with a file.A bench grinder may be another option.Another way is to use a hand-held angle grinder.Another way is to use a handheld diamond sharpener.Another way is to use a handheld wet-stone grinder.

    What are the different types of lawnmower blades?

    Different types of mower blades are available for different jobs. Although there are many types of blades on the market, only a few are worth considering, depending on your needs.

    The different types of lawnmower blades are the standard blade, the rotary blade, and the mulching blade. Sometimes you will learn about straight blades, low lift blades, high lift blades, mulching blades, and gator blades too.

    Whats

    Lawn mowers come in all shapes and sizes, but the blades that cut your lawn are always the same. There are two types of blades that can be found on a standard lawnmower: high lift blades and mulching blades. The difference between these two kinds of blades is rather straightforward high lift blades are designed for cutting taller grasses, while mulching blades are designed to shred the grass into finer pieces for efficient decomposition.

    How to sharpen lawn mower blades?

    Clean Mower Deck And Blade

    How to Sharpen Lawn Mower Blades – Best Way

    Use this opportunity to scrape off every bit of debris on the underside of your mower that you can. Its best practice to regularly clean your mowers deck and blade, but like flossing teeth, lets be honest and acknowledge that a lot of us dont do it enough.

    You can use a wire brush or whatever blunt object you have on hand to scrape all of the dried dirt and grass off the deck and blade. For stubborn patches of gunk, using a little bit of water can help a lot. I usually tackle the deck first and then move on to cleaning the blade. This can be tricky with the blade fastened in place, but do the best you can to get it clean.

    Don’t Miss: When’s The Best Time To Fertilize Your Lawn

    Check The Blade Balance

    Mowers run smoothest when the blade is balanced. However, sharpening sometimes removes more metal from one edge than another. This makes the blade unbalanced.

    Its important to fix a blade that was imbalanced during sharpening. If it wobbles now, it will wobble on your mower too. An unbalanced blade may damage your mower. The vibrations alone are annoying, but the bearings or blade shaft might actually get destroyed.

    Follow these steps to check the balance on your sharpened lawn mower blade:

    • Support the blade under its center, like a scale. A screwdriver is an easy tool to use. Insert the screwdriver tip through the hole in the blade. The blade should balance on the tip or drop to balance on the handle.
    • Hold the blade horizontal, then let go. It should remain level.
    • If the blade drops in either direction, it means that the blade is unbalanced.
    • The side that dipped down is heavier. Take a few strokes off that end to remove some metal, then retest.

    For more precision in judging blade balance, purchase a blade balancer. Its a good addition to your mower maintenance tool kit. Its a cone-shaped tool that has a spindle for the blade.

    Your Grass Will Look Tidier And Stay Healthier After Mowing By Making Sure The Business End Of Your Machine Has A Sharp Edge Follow This Easy Guide To Get The Job Done

    When your lawn mower isn’t making the cut anymore, usually it’s because the blade has lost its sharp edge from use. Removing the blade and sharpening it yourself can seem intimidating if you’ve never done it before. But it’s actually a simple process, and you’ll only need two tools to do it.

    Once you know how to sharpen your lawn mower blade, it’ll take you a fraction of the time it takes to mow your lawn. So, just follow this step-by-step guide to give your grass a crisp, clean cut again. Or, if you don’t want to worry about sharpening the blade, you can just remove it and bring it to a lawn mower repair service near you to take care of it.

    Test Garden Tip: When grass blades have torn, ragged ends that turn brown after a mowing, chances are it’s time to give the blade some attention. Most experts recommend sharpening power mower blades once or twice a season, depending on how often you use your mower.

    Read Also: When Do You Fertilize Your Lawn

    What Is The Easiest Way To Sharpen A Mower Blade

    Now that weve seen the best tools for sharpening your blades, lets look at the best way to go about it.

    The most important thing when you are dealing with lawnmower blades is safety. Never reach under your mower deck while the machine is on. Also, ensure that you remove the sparkplugs to eliminate the risk of the mower turning on while youre under there.

    Cheapest 48v Lithium Golf Cart Batteries

    Lawn Mower Blade Sharpener Wickes

    p5 text

    If you want to sharpen the blade yourself, you will need a grinder which you can buy for $20 to $50. For example, the highest rated lawnmowerbladesharpener on Amazon retails for about $20. If you want to choose a professional, lawnmowerblade sharpening can cost about $5 to $15 per blade.

    www credit one com

    Magna-Matic MAG-9000 Lawn Mower Blade Sharpener Item # MAG-9000 $999.00 Magna-Matic MAG-200 Dust Collector with 2.5″ Inlet and 3.5′ Hose Item # MAG-200 $669.00 Magna-Matic MAG-10400 Sharpener Service Center Stand Item # MAG-10400 $349.00 Reel Mower Lapping Compound Magna-Matic 1/2″ Wide Medium Grinding Wheel for MAG-8000 Item # MAG-8000. The blade should always slice the grass, not pull. 10 / 10 schulzie/Getty Images Its Been Awhile Lawn mower blades should be sharpened every 20 to 25 hours of use time, according The Home Depot. If youd rather not sharpen the blade, theyre not overly expensive to replace. Originally Published: June 08, 2021 Alex Shoemaker.

    Additionally, as a grassroots initiative, we encourage Vermonters to get involved in the campaign by advocating for the use of electriclawn care equipment in their communities. “The Mean Green mowers are powerful, reliable, and obviously great for the environment. The only routine maintenance is greasing the front wheels and sharpening.

    Recommended Reading: How To Treat Summer Patch Lawn Disease

    What Is The Best Way To Sharpen A Lawn Mower Blade

    One of those “I really must get around to…” questions, but what is the best way to sharpen a lawn mower?

    My own lawn mower is a fan blade , but for maximum usefulness an answer should also include the cylindrical blade types and any other common types as well.

    • 1Could you please post a photo of a “fan blade”. I can add one for a “flat blade” if you wish . I think of a photo of each would add to the question… Mike PerryOct 5, 2011 at 15:24
    • fan blade/ flat blade are the same thing. It rotates in a horizontal plane. I’m not sure about finding the cylindrical one – I’ll try to find one online.Oct 5, 2011 at 15:30
    • 2Oops! my bad I meant “fan blade” & “cylindrical blade”. It’s probably just me, but “vertical axis” in “flat blade on a vertical axis” isn’t making sense to me at the moment… Mike PerryOct 5, 2011 at 15:45
    • I always just pull the blade off the machine and use an angle grinder, maybe there’s a better way? Takes maybe 15-30 minutes, depending on how hard it is to get the bolt off. Oct 5, 2011 at 17:04
    • 1@MikePerry: The axis is the direction it rotates around. A merry-go-round also has a vertical axis. The cylindrical mowers have a horizontal axis at right angles to the direction of motion.

    First let me say, I’m no expert when it comes to sharpening lawnmower blades, I’ve done it on the odd occasion — only on rotary mower blades, never on cylinder or reel mower blades.

    Cylinder or Reel mowers

    How To Sharpen Lawnmower Blades

    Find out how to sharpen lawnmower blades without coming to harm with our expert guide

    Get the best home decor ideas, DIY advice and project inspiration straight to your inbox!

    Thank you for signing up to Realhomes. You will receive a verification email shortly.

    There was a problem. Please refresh the page and try again.

    By submitting your information you agree to the Terms & Conditions and Privacy Policy and are aged 16 or over.

    To keep your turf in great shape, you might need to know how to sharpen lawnmower blades. Mowing is an important element in ensuring a lawn stays looking its best and, for this, lawnmower blades need to be sharp.

    When the blades become blunter, theyll tear rather than cut which will compromise the appearance of the lawn and can introduce disease. Dull blades also make the job of mowing lengthier, stopping you getting on with other tasks, or just sitting back and admiring the green and healthy lawn.

    Even if you have the best lawnmower, you can see why keeping the blades in top shape is essential. So, our guide has the details you need on how to sharpen lawnmower blades while staying safe, and weve asked the experts to share their advice, too.

    You May Like: How To Price Lawn Cutting

    RELATED ARTICLES
    - Advertisment -

    Popular Articles

    - Advertisment -