Clean Or Replace Your Air Filter
A lawn mowers air filter should be cleaned or replaced to keep dirt and debris from clogging the engine.
- Determine if you have paper or foam air filters.
- Check your operators manual to determine if air filter pre-cleaner is required. If so, follow the instructions in the manual.
- Disconnect the spark plugs before removing filters.
- Replace paper filters when they look dirty. You should keep a few on hand.;
- Plastic foam filters should be removed and washed with warm, soapy water. Air-dry thoroughly, then work about 2 tablespoons of clean mower oil evenly across the filter to lightly coat it.
- Reinstall the filter according to instructions.
- Reconnect the spark plugs.;
Tip: Be sure to check the air filter a few times during the mowing season, particularly if the mower is getting heavy usage.
What Kind Of Oil Goes In Lawn Mowers
Oil. Its vital in keeping the lawn mower engine components lubricated, but what kind of oil is suitable for a lawn mower? That depends on what kind of mower you use, whether that mower is powered by a four-cycle engine or a two-cycle engine, and even what the outside temperature is.
Choose The Right Viscosity
The appropriate viscosity is what will help your engine be lubricated thoroughly, even though the temperature may fluctuate. One viscosity doesnt perform the same as another, and so there are two common viscosities for use in lawn mower engines. The first, SAE 30, is great for mowing during the regular mowing seasons, but will often result in hard starting when the temperatures drop below 40 degrees Fahrenheit.
The second viscosity, 10W-30, is better in cold weather, but will often see increased fuel consumption and burn-off in weather above 80 degrees Fahrenheit. Choose the viscosity that is most appropriate for your surroundings if you live in an area where you may still need to mow into the cold months, this second viscosity may be your best choice.
Recommended Reading: What Is The Best All Wheel Drive Lawn Mower
Maintenance Schedule & Approximate Capacity:
- Oil capacity is typically 15oz or 18oz*.
- Change engine oil every 50 hours or annually, which ever comes first.
- Oil capacity is typically 48oz or 64 oz*.
- Change engine oil every 100 hours or annually, which ever comes first.
*Do not over fill your engine with oil. Use the Oil Finder tool above or check youro perators manual for the proper amount of oil recommended for your engine.
When Does My Lawnmower Need An Oil Change
New mowers may need an oil change after the first 10 hours of use. Check your operators manual to make sure. Generally, lawn mowers need an oil change every 25 to 50 hours of lawn care. Always check the oil level with the dipstick in the middle of summer, to see where the oil level is and whether your lawn mower could use a top-off.
Also Check: How To Fix Lawn With Lots Of Weeds
Types Of Oil For A Lawnmower
If you want to use the car oil for your lawnmower, it depends mostly on the quality of the car oil you used for your car. Note that a low priced and low-quality car oil will cause severe damage to the lawnmower.
Most of the lawnmower oil is highly-priced due to its good quality. SAE 30 motor oil is always recommended to keep the lawnmower engine in a good condition for a long time. But before using oil, check the user manuals of the mower to get the best recommendation.;
Sometimes 10W-30 and 10W-40 is used in the car. These two types of oil are good in quality and you can use these oil as your lawnmower fuel.;
Dont leave us. We also have some core information for you. Keep reading.
Shop For Lawn Mower Engine Oil And Parts At Repair Clinic
Finding the right oil, along with everything else that will keep your lawn mower engine running smoothly, is easy when you visit Repair Clinic. Whether youre looking to purchase a tune-up kit to keep the engine humming, or you need to replace an oil filter, carburetor, valve, piston, or primer bulb, Repair Clinic stocks genuine manufacturer parts from the top names in small engines, such as Briggs and Stratton, Craftsman, Honda, Kawasaki, Kohler, MTD, Tecumseh, Toro, Walbro, and more. Enter the full model number of your lawn mower, or the mowers engine, in the Repair Clinic website search bar to see a complete list of comparable parts. You can then narrow that selection by using the Part Category filter as well as the Part Title filter to identify the specific part that works with the engine. While youre on the Repair Clinic site, you can do a little exploring to find how-to videos, articles, and diagrams to instruct you on how to replace the part yourself.
You May Like: Can You Hydroseed Over An Existing Lawn
Can I Use 5w 30 In My Lawn Mower
4.4/55w 30 willuse 305w305w30 willlawn mower
Yes! We have modified our engine oil recommendations to state that you may now use a synthetic 5W30 or 10W30 oil in all temperature ranges. Keep in mind that the use of synthetic oil does not prevent you from performing your regularly scheduled lawn mower maintenance .
Beside above, can I use 5w30 instead of SAE 30? 5w–30 is fine to use. It has the same flow rate as SAE30 at normal operating temps. The way oil works is, the first number is flow rate at ambient temp. The second number is flow rate at operating temp of the engine.
Similarly, it is asked, can I use car oil in my lawn mower?
SAE 30 motor oil is commonly recommended for use in a lawn mower engine, but the safest best is to use the type of oil your lawn mower manufacturer recommends. Often 10W-30 or 10W-40, the same motor oil types that are used in vehicles, can also be used in a lawn mower.
Is there a difference between SAE 5w30 and 5w30?
The W means winter. So the first number such as 5 in 5w-30 means that it flows better when cold. 10w-30 would be a bit thicker while cold. However it is important to note that the 30 is the same across all three oils, meaning that they will all be the same viscosity once the engine is at full operating temperature.
How To Identify The Lawn Mower Or Small Engine Oil Type
After finding out these different kinds of engines and the types of oil that would suit it best, it might start to get a little more difficult in picking what the best is for your own lawn mower. Fortunately, the Society of Automotive Engineers, or the SAE, has come up with a way to categorize the motor oils. This will be the label that indicates the viscosity, or thickness, and temperature in which the engine oil can and should be used. You will be able to see the SAE printed on every packaging of the engine oil products. Not only that, but it will also help you determine if the engine oil is synthetic or not.;
Read Also: How To Do Overseed Your Lawn
How To Check The Oil Level Of Your Lawn Mower
To check the oil level of your lawn mower, take the following steps:
- Apply a little clockwise pressure to the dipstick cap to twist it open
- Remove the cap and clean with a rag to make for clear reading
- Place the clean dipstick cap back into the groove ensuring that the teeth of the cap match the groove top.
- Apply some pressure again by turning the cap anticlockwise to lock it.
- Now remove the cap again as before to view the oil level
- Pour oil via the groove in ounces at a time if oil levels are low.
- Allow some time to elapse before rechecking oil levels.
Small Engine Oil Recommendations
Different oil types are more effective in different climates depending on the temperatures. Learn which one will be best for your mower.
- SAE 30 is best for warmer temperatures and is the most common oil for small engines.
- SAE 10W-30 is suitable for a varying temperature range. This grade of oil improves cold weather starting, but may increase oil consumption.
- Synthetic SAE 5W-30 offers the best protection at all temperatures as well as improved starting with less oil consumption.
- SAE 5W-30 is formulated for very cold temperatures.
- Vanguard 15W-50 is suitable for a varying temperature range and for continuous use, such as commercial lawn cutting applications.
Tip: When choosing lawn mower oil, use a high-quality detergent oil classified as For Service SF, SG, SH, SJ or higher. Do not use special additives. Synthetic oils are an acceptable oil at all temperatures. Use of synthetic oil does not alter required oil change intervals.
You May Like: What Is Pre Emergent Lawn Care
Honda Lawn Mower Engine Oil Type
When you are a user of Honda lawn mower, then its important to understand the oil type as well. As it comes with air-cooled, four-stroke engines with the facility of oil reservoirs, it is needless to say that the right level of oil is important to avoid engine damage.;
Most of the mowers from Honda are facilitated with the GCV190 engine. In this 6.5 HP engine, almost 18.6 ounces of oil is needed.;
If the temperature is between 0-100 degrees, it is recommended to use SAE 10W-30 grade oil with at least an SJ rating from API. Dont forget to change your oil after every 50 hours of operation.;;;;;
If the temperature is cold enough, then you need to use SAE 5W-30 thinner weight oil.
Honda suggests to use detergent oil and to avoid non-detergent oil to make the engine more durable. When you get the right oil type for the engine, its easier to run it for long with smooth lubrication.
Amsoil Small Engine Synthetic Motor Oil 10w
Buy Amsoil Small Engine Synthetic Motor Oil 10W-40
Amsoil is a brand known for its high-quality synthetic 2- and 4-stroke engine oils. These oils achieve excellent results in both recreational and work equipment. The same applies to the Amsoil 2-stroke synthetic oil Saber professional Mix, which has been improving the performance and protection of 2-stroke engines since 1973.
It is intended for use in hand-held pre-mix two-stroke machines such as trimmers, brush cutters, blowers, chain saws, cutting machines and shredder vacuum cleaners. This mix solves the problem of most owners and users of power engines that the exhaust fumes of two-stroke engines mix oil and gas in the right ratio. It also works well in preventing wear, possible engine failures and many other problems of 2-stroke engines. Amsoil Saber Mix is perfect for use in air-cooled engines that are pre-mixed, as it can withstand extreme heat and pressure, thus protecting engines from wear and dangerous deposits.
- Optimizes the protection and performance of leisure and work equipment
- Stabilizes the fuel, eliminating the need to add fuel stabilizers when storing for the season
- Optimum cleanliness and lubrication properties
- Prevents wear and tear, clogging of the outlet opening, contamination of the plugs and sticking of the rings
- Anti-rust formulation makes it safe to use in the humid environments of two-stroke engines
- No disadvantages known at present
Recommended Reading: What To Do With Brown Patches On Lawn
What Is Lawn Mower Oil
Lawn Mower Oil Types
10W30 is a common motor oil grade suitable for many lawn mowers. Your owners manual will tell you the exact grade required, but in almost all cases 10W30 is the right stuff for a four-stroke engines. Any brand of oil thats suitable for cars or trucks will work fine in your mower.
Full Vs Blend Synthetic Oil Whats The Difference
Full synthetic oil is regarded as the purest type of synthetic oil. It uses a synthetic base stock mixed with additives to ensure the high performance of the oil. Consumers frequently use full synthetic oil due to several factors such as longer change oil intervals, optimum protection to the engines, and longevity for usage.
Although the study shows that fully synthetic oil is 30% more expensive than synthetic blend oils, the longevity of the full synthetic oil is worth it for its price.
Why Synthetic blend oils are cheaper?
Synthetic blend oils are a mixture of synthetic and mineral oils. They were designed to provide almost the same benefit as full synthetic oils but at a lower price.
However, it is said that synthetic blends are not capable of reaching the same performance as that of the full synthetic oils. Yet, it is much closer to the average full synthetic change intervals.
Both types of synthetic oil are better options for your engines than conventional oil. Both of them extend the life of your engine, and you will never go wrong in choosing any of them.
Benefits of full synthetic oil
Benefits of Synthetic Blend
1. It offers better performance and protection than conventional oil.
2. It is less expensive than full synthetic oil.
Also Check: What Can I Spray On My Lawn To Kill Gnats
What Type Of Oil Should I Use In My Mower
Oil is incredibly important to keep your engine lubed up and running. Particularly in two-stroke mower engines, where oil and fuel are combined, having the right oil can mean the difference between getting your lawn mowed or having to take your mower in for repairs. So what oils are recommended for use in lawn mowers, and why?
What Oil Can You Use In A Lawn Mower
The type of oil you use will make all the difference in how long your lawn mower lasts and the quality of service it gives you. There are many types of oils out there but we recommend that you only invest in a high-quality oil. If you want to learn more about lawn mower oil, we recommend this interesting tutorial.
One of the factors to keep in mind when picking lawn mower oil is the climate in your area. But, you should also heed your manufacturers recommendation for the best oil to use in your mower.
Some of the oil options from which to choose are:
- SAE 30: This is the most common type of oil used in small engines like those found in lawn mowers.
- SAE 10W-30: This high viscosity oil is specially formulated for cold temperature. It is ideal if you live in cooler regions but colder temperatures may mean higher oil consumption.
- SAE 5W-30: If you live in very cold temperatures, you will need specially made oil that can withstand extreme weather. The SAE 5W-30 is a good choice.
- Synthetic SAE 5W-30: Synthetic lawn mower oil is the preferred oil for lawn mowers. Not only is it gentler on the metal parts of the mower; it also offers protection regardless of the temperature. You will get the most out of synthetic oil whether you live in extremely low or high temperatures. Most synthetic SAE 5W-30 oils are also formulated for lower oil consumption.
You May Like: How To Keep Lawn Green In Summer
Change Lawn Mower Oil
To ensure it performs up to its maximum capacity, make sure you change lawn mower oil at regular intervals. Old oil that is black or contains debris should be drained and replaced. This will improve performance, reduce costly repairs and extend engine life of gas lawn mowers. A push mower has an oil capacity of 15 to 18 ounces. It should be changed either every 50 hours or annually, whichever comes first. A riding mower has an oil capacity of 48 to 64 ounces. It should be changed either every 100 hours or annually, whichever comes first.
- Before changing the oil in the lawn mower, disconnect the spark plug.
- Remove the drain plug underneath the mower and allow it to drain into an oil-safe container.
- If the mower does not have a drain plug, use an oil extractor kit to remove oil from the compartment.;
- Add new small engine oil to the compartment up to the dipstick fill line. Oil formulated for small engines will keep your mower running at its best.
- Be sure to recycle the old oil properly.
What Oil Type Is Best To Use For My Lawn Mower
For Briggs & Stratton manufactured small engines, we recommend the use of;Briggs & Stratton Warranty Certified mower oil for best performance in Snapper lawn mowers, tractors, snow blowers and other outdoor power products. Other high-quality detergent small engine and lawn mower oil types are acceptable if classified for service SF, SG, SH, SJ or higher. Do not use special additives.
Recommended Reading: How To Restore Grass Lawn
Find The Best Oil For Your Engine
Use the Oil Finder tool to help you find the best oil for your small engine. Choose your equipment, engine name and outside temperature that you will be using it in to find your recommended oil and how much to use.
If you need help determining if your riding mower’s engine is a single cylinder or twin cylinder , click here.
The Viscosity Of The Oil
Increased oil consumption can be caused by the wrong oil viscosity grade.
The different lawnmower manufacturers have different specifications of the kind of oil you should use.
Thus, trust their instructions to prevent any damage from occurring.
This will help to reduce the burning of oil or the lawnmower being slow.
Recommended Reading: How To Estimate Lawn Mowing Jobs